I'm definitely a club ho, and major tinkerer. I feel my bag is mostly set, but I'll likely be switching up the wedges (want to check out Artisan once they offer lefty), and still hunting for a good lefty NP2. Driver Ping G410 LST 9º, turned down to Big Minus (7º and open) Oban Kiyoshi High Balance, 65g 05 (X flex) 45 inches Fairway Woods Ping G410 LST 3 wood 14.5º Turned Down to 13.5º (-1º loft, and flat) Ventus Blue 7s, tipped 1/2" 43" The SEXWOOD. (shoutout Tron Carter) This club has been the money club. I use it into a lot of par 5's and when something a little shorter off the tee is needed. Absolute laser beams with plenty of height! Might be my favorite club to hit! Ping G410 7 wood (20.5º) Turned down to 6 wood loft (-1º loft, and flat) Length of a 5 wood Ventus Blue 8s, tipped 1/2" Hybrid Ping g410 4 Hybrid (22º) Turned Down to 21º (-1º loft, and flat) Accra Cs1 hybrid shaft, M4 (stiff), SST PURED Irons Ping Blueprints (5-PW) Orange Dot (2º flat) Power Spec'd Limited Edition KBS C taper 125 s+ shafts, SST PURED Boyd Blade and Ferrule Wedges This hodge podge is never settled. I am pretty happy with the gap wedge...however the Sand Wedge and Lob wedge have much to be desired. 50º Ping Glide Forged Limited Edition KBS C taper 125 s+ shafts, SST PURED 2º Flat 54º Limited Edition Slate Blue Vokey 54.10 F Grind DG s400, SST PURED 2º flat 58º PXG Sugar Daddy KBS C taper 120 S 2º flat Putter The one club in the bag that is never safe (Even though I'm a pretty good putter...I just love to tinker) Taylormade Spider X Chalk short slant 32.5" 2º flat Superstroke Flatso 1.0 Bag Ping Hoofer Ball Yellow Pro V1 Headovers EP Headcovers

maxbianchi did you go to ASU as well?? No sir, just a fan.

So historically I've been an amazing wedge player. Like really good. I don't get that much time to practice anymore, and lately inside of 100 yards I flat out stink. I'm not going to use the "Y" word, but it's close. I watched this video today, switched to my old Vokey....and it's like a light went off. We are cured! at least for now...

Loved that video when I first saw it. Good stuff.

Jokes no but I know a handful of people that are, as well as the owner so I’ve played out there a handful of times. Best course in Mn in my opinion.

ForeLeft I haven't played down there yet but am moving down from the Duluth area. It is on the top of my list for memberships in the future.

Jokes I need to get over to Northland. Heard it’s sick. Let me know if you need any connections to get out to Windsong.

ForeLeft Its a great Donald ross design that has undergone lots of change in recent years. With the grain it is pretty tough to putt on the greens. Most uphill putts always seem to be into the grain and downhill end up being down grain and unstoppable in some cases. Overall great test of golf. If you are ever in Duluth this summer let me know and I would be happy to have you as a guest.

Well, I have to say I blame @maxbianchi on this one. I have been absolutely murdering the ball since switching to an X flex this season. Playing extremely well. Hole 2 tonight, stipe one down the middle... think nothing of it. Hit it to a foot, tap in bird. Let's Go. Hole 3 is a short par 4...just the Sexwood off the tee. Hole 4 is a par 3. Get to hole 5, a short par 5. Take the driver out of the bag and tap it on ground like a normally do...and hear a very weird rattle. I think the epoxy has failed. Face Palm. Pulled out 3 wood and still got home in 2, made bird to go 2 down. Went on to par out and shoot a bogey free 34 (-2) but a club breaking is never fun. Decided to reach out to a pro friend of mine, and he's going to hook me up with PUD. Going to copy @DaHOF a little but with a twist (make my own triple diamond in a way). Mavrik SZ 9º (will likely turn down) Graphite Design AD XC 6x Two 8 gram weights (instead fo the standard 14g and 2g). Stay Tuned...I guess?

ForeLeft's WITB

ForeLeft

Massive changes coming to the bag.

Got these bad boys in the mail this week. 4-PW with MMT 105TX and limited edition Mizuno x BBF co ferrules. UNC GP MMC TEAMS grips

Still waiting on my artisan (LAGP putter shafts have been on backorder for a while).
Have an order in for some Corey Paul wedges.....stay tuned for those!!

titleistforged

Ooo Corey Paul wedges... been seeing those online. Curious to hear your thoughts!

ForeLeft

titleistforged will let your know! Going to be awhile. Has to order the heads from Japan (60-90 days) and then hand grind them. I won’t be seeing anything but snow for the next 6 months anyway so not like it matters 😂

tinkerer

@ForeLeft Excited to hear your thoughts on the 105TX’s I was between those and the 125’s. I went 125 and absolutely love them!

I have a set of Corey Paul Wedges frombwfore he offered hand grinds and they were amazing, I may have to order a set with the right soles!

ForeLeft

tinkerer I was really nervous to go with 105. As I am coming from 125S+ C tapers.

I’ve talked with 3 people who all said 125 Tx was too much, and to go 105. I guess we’ll see 🤷🏼‍♂️ Lol.

kyledrum2002

I did the switch from DG S300 to a 105g x-flex shaft in some MP-18s a year ago. It didn’t work out for me. However, I was a bit impatient too. I am infatuated with equipment like most on here, but always tend to prefer what I had versus what I just bought new.

ForeLeft

Let me know if anyone wants to chime and and help figure out what I should do for 3 wood and 5 wood.

reahaft my ping g410s?
get Mavrik?
wait for epic speed?
something else?

as for shaft. I’m lost. Idk anything about fujikura but they have my interest.
Speeder TR
evolutuon 5
platinum
2.0
ventus black velocore?

im lost!

ckay

What are you looking to accomplish? I just got into a SIM Ti 5 wood after years on the struggle bus and am very happy.

ForeLeft

ckay I need a low launch 3 wood and a low/mid 5 wood (or keep sexwood)

LAGP Trono could be an option in existing pings.

Jokes

ForeLeft I was interested in trono for my driver but with how little reviews there are it is a shot in the dark. I had the Ventus 7X in my driver this year and I think that is something that would suit you well. I hit up 4-5 degrees on the ball and my ball flight was still just a nice flat trajectory with no ballooning. I’ve also had good look with tensei white in my fairway this year. I can get it to go 280-285 by playing it back and letting it come off low and running or I can have it go dead up in the air and carry about 240. Best fairway wood shaft I’ve ever had with the amount of change I can bring to ball flight.

ForeLeft

Jokes really great to know!

i have the av raw orange in driver right now. I’m scared to go white in my fairways, as I didn’t get along with it in my driving iron a couple years ago (but I’ve heard these are different animals).

what Ventus do you have now? I currently have the blue (velocore) and hit absolute moon shots with it. Need to bring flight down a ton.

Jokes

ForeLeft I have the Ventus black 7X. Want to try out the AV orange though as I used to use the OG orange in a driver and loved it and want to get back to that feel. If you like the orange I think you would like the white in your fairway

ForeLeft

Jokes

ForeLeft about time it heads your way. Good thing it’s fedex as well all of my USPS packages going through Minneapolis have been a nightmare.

ForeLeft

0177 prototype
Smooth face
Torched neck (and weights)
star alignment aid
LAGP shaft

ckay

Yo...that is a hell of a flatstick!

mljones99

So many things I love about that putter.

southpawfox

That thing is sweet! How does the 1077 proto differ from a regular 1077?

ForeLeft

pfdz Smooth Face. They don't offer that currently, and is still in a prototype stage. I said I was willing to test it.

mljones99

ForeLeft smooth face is what I would want. Well done.

southpawfox

ForeLeft so sick!! Im thisssss close to putting a deposit in on that new 0820 shape with a slant neck 😄