Feature | Main Site

19 and 21 with trono 75. Looking for an easy club off the deck. Not sure if 19 or 21 will fit the gap better.

    Picked up a stock 19* x flex from roger dunn. the shaft flex is completely underneath the grip. Is that normal for the stock setup? I also thought it was the 80g shaft for the x flex, but it says 70g x flex 6.5 under the grip. Also seems like the shaft was untipped with that much space between the hosel and the shaft lettering. Thought I read somewhere these UW's had shaft tipping of 1.75"?

    bruinmw

    that definitely looks a touch off. I would say that is for sure untipped, and the shaft flex not being visible is definitely different than anything I’ve seen on the rack.

      Eddie thanks for the reply. guess i'll have to go exchange this for a shaft properly tipped.

          bruinmw I'm curious, what's the length of it? Since all of the UW's are .355 I'm assuming someone just didn't tip it during assembly. I would certainly exchange it.

              You nailed. Here is a rough picture of mine on an rdx smoke.

                Putterho thanks! mine is definitely not tipped based on your measurement. Not sure on length, but seemed right while hitting it on the range today. Hopefully roger dunn has another x flex in stock to do the exchange this weekend. i do like the consistent ball speeds across the face over my TM SIM Max rescue. Will be interesting to see how it plays on the course compared to the sim max now.

                    If you are hitting it well... why mess with it?

                    bruinmw something off on that one. Either really short or less tipping. Or both. Looks like a custom order that went wrong.

                    notnsure of the std tipping but they allow you to soft it by 1” or tip it extra by 1” when ordering so I figure std tipping is likely 1”.

                        The 19 degree UW seems longer than what I was hitting the sim max rescue when I had it. A lot longer.

                          dbenick3 hitting it well on range is one thing for me, but i always leave final judgement to how it performs under pressure on the course.

                          brushie i do like my sim max rescue. will be interesting if i see the same extra length with the UW...

                                I’m not a particularly high ball hitter but the 17 degree is producing bullets for me. I love it and it definitely is achieving its goal of being a big ass driving iron for me.

                                Eddie Loving the sound of this. Have a fitting at the club with Callaway Saturday. Just in time to get my club fix on and potentially snag an new UW.

                                  Mine shipped should have it next week.

                                    DaHOF

                                    its so head heavy and with the replaceable weight you can go shorter for more control.

                                    im chopping 3/4” off to make it my safety crutch tee club, because I know with the flat flight it’s got plenty of juice, and I can get height on it if I hit a big fade with it.

                                      Eddie

                                      i ordered the 21 and plan on making it short as well. Going 40.5 as I need it to fill the gap between 3 wood and 4 iron.

                                        4 days later

                                        Eddie Built mine with a Ventus Black 10-X at 40.5" (Mitchell ruler) really only about 3/8" shorter than standard and tossed in a 9g weight to get it to D4, super easy if you can get your hands on the correct weight needed.